Products | Quote | Links | Main Page
Click on each picture to see a bigger version.
HTZ 1200 Professional
Diameter of drive wheels 1220 mm (47.25”)
Width of wheels 120mm (4-3/4”)
Saw width (5”-6")
Motor 52 hp (60 available)
Head rig width 3200mm (10’4”)
Capacity 1,000+- bd ft per hr
Max log diameter 1100mm (43”)
Automatic hydraulic saw tension system
Sawyer controlled Hydraulic saw guide
Manual carriage speed control
Motor driven Mud cleaner / debarker
CE standard safety controls at all critical operation areas
4x4 drive of the carriage wheels
4 hydraulic log clamps/ knees one of which will have a taper incorporated into it
2 dual log by-directional chain type turners
Length of track 9.5meters (31’)
Power rolls for cant removal 2 powered 1 dead roll
Sloop sheet/dead roll at the end of the mill for ease of operator removal of sawn lumber
Log loader 3 arm hydraulic
Computer setworks
9 hydraulic valves 8 in use 1 reserve for hydraulic log deck
Dust collection blower system mounted on mill
Lumber drag back arm
1 steatite saw
Prices available on request
SB420 Milling Machine For Round Log Home Timbers/Swedish Cope
Width 2100 mm (82.5”)
Width of the line 1465 mm (57.75”)
Total width 2100 mm (82.5”)
Total height 2350 mm (92.5”)
Height of line 450 mm (17.75”)
Length of the line 12000 mm (9000 mm) (68.75’)(29.5’)
Height of the head machine 2000 mm(78.75”)
Max. diameter of the timber 420 mm (16.5”)
Max. diameter of the log 600 mm (23.6”)
Min. diameter of the timber 100 mm (3.9”)
Max. length of the timber 9000 mm (29.5’)
Min. length of the timber 1500 mm (4.9’)
Drive motor 0,75 Kw/1400 turn/min (1 hp)
Boring motor 2x 0,75 Kw/2800 turn/min (1 hp each)
Carriage motor 0,75 Kw/1400 turn/min (1 hp)
Belt transporter motor 0,37 Kw/1400 turn/min (.5 hp)
Hyd. pump motor 4 Kw/1400 turn/min (5 hp)
Total power 33 KW (44 HP)
Speed of the movement 0-25 m/min (0-82 ft /min)
Speed of the rotating the timber 0-300 turns/min
2 hydraulic lift for the timber hydraulic clamping of the logs
Milling cutter motor 2 x 13 Kw/2800 turn/min (17 hp each)
Production levels will be determined by infeed and outfeed handling equipment
